Product Description
Telstra/Optus/Vodafone Cel-Fi Go G41 Smart Repeater 3G/4G/5G* is suitable for building applications and is designed to boost multiple bands from a single selected carrier. You can set the unit to boost either Telstra, Optus or Vodafone and easily switch between them should you decide to change carrier in the future. Includes amplifier module and mains power pack. Requires donor and coverage antenna. Select Antenna Pack from dropdown box above.
* Telstra 5G is not currently enabled due to carrier approval.
| Downloads | |||
 |
Cel-Fi Go G41 Data Sheet | ||
Antenna Requirement
A working booster system comprises two antennas connected via special coaxial cables to the GO G41 input and output ports whereby the GO G41 amplifies the input signal and produces a dramatically boosted output signal to allow mobile phones to make and receive calls, perform SMS messaging and access the internet inside the building where they would otherwise not be able to do so if located in a weak signal or black spot area. Other devices such as Laptops, Tablets, Modem, Routers, FPOS terminals, alarm systems and indeed any device with cellular access via a supported carrier SIM will also receive the fantastic benefit of a boosted 4G/5G signal if used inside the building within the coverage area.
The antennas function is to receive and broadcasting the 4G/5G signal. One antenna is used for transmitting and receiving the cellular signal from the Cell Phone Tower. This antenna is known as the donor antenna or external antenna as is located on the roof of the building where it can pickup the a 4G/5G signal for boosting. The second antenna is known as the coverage antenna or the internal antenna and is used for broadcasting the boosted 4G/5G signal inside the building.
Information for Antenna Packs
6.5dBi Omni with 5m LMR195 grade cable & 8dBi Panel with 6m LMR195 grade cable Antenna Pack Data Sheet Data Sheet
Simple to install as the antenna doesn't need pointing (aligning) to the cell tower. Ideal for metro areas where there maybe lots of high rise building or other obstruction or terrain issues where Omni Antennas are known to perform better due to there wide vertical beam.
12dBi Compact LPDA with 6m LMR200 grade cable & 8dBi Panel with 6m LMR195 grade cable Antenna Pack Data Sheet
Simple to install due to the light weight and compact design of this antenna. Usually mounted on a fascia pole above the gutter. The antenna is very good for general use in metro and regional centres where the signal is quite good outside the building.
14dBi LPDA with 10m LMR240 grade cable & 8dBi Panel with 6m LMR195 grade cable Antenna Pack Data Sheet
This is a larger style Yagi antenna and is designed to mount on a pole or tripod on the roof. A good all rounder for various environments, including metro and rural areas where the outside signal level is medium.
18dBi High Gain Yagi with 10m LMR400 grade cable & 8dBi Panel with 6m LMR195 grade cable Antenna Pack Data Sheet
This high gain yagi antenna is our most polular model and is suitable for various environments including weak signal, black spots and regional or remote locations. Designed to mount on a pole or tripod on the roof. Select this antenna if you signal outside the building is low.
To see our comprehensive range of GO G41 Kit Click here
Cel-Fi Go G41 Smart Repeater represents the latest in 4G cellular repeater technology. Building on the success of the GO2 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.
Cel-Fi Go G41 Smart Repeater operates on more frequency bands, now supporting Optus 700 MHz and 2300 MHz 4G networks, and can be easily switched between Telstra, Optus and Vodafone-TPG should you change service provider.
Cel-Fi Go G41 Smart Repeater is ideal for large inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.
Expanding on GO2’s dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.
Features:
- 700L/850/900/1800/2100/2300/2600 MHz (700 band not supported on Vodafone)
- 3G, 4G, VoLTE, NB-IoT (GO4 has 5G capabilities, but currently not enabled or approved)
- Carrier Switching using WAVE App between Telstra, Optus or Vodafone
- Up to 3000 m2 coverage area
- Two band simultaneous relay
- Total System Relay Bandwidth – Up to 40 MHz
- Remote Monitoring, Control and Alert Capabilities via WAVE Portal
- Ethernet Port for connection to internet source for live monitoring
Includes:
- Cel-Fi Go G41 Smart Repeater
- 240v Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi GO Quick Start Guide and any other information contained in the box. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Use our online Contact Form for quick response.
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
