Product Description
Cel-Fi Cellmate Portable Rapid Deployment Repeater Kit for Telstra 3G/4G/4GX. Enclosed in a watertight, crush proof, ruggedised Pelican Case. The Cellmate is a portable mobile repeater integrated into a ruggedised carry case that can be transported and used where mobile signal is required. The Cellmate is ideal for emergency services, fleet operators, construction and mining. For low loss extension cables, see ACCESSORIES below.
| Downloads | |||
 |
Cel-Fi GO G31 Mobile Data Sheet | ||
Telstra Cel-Fi Go G31 Smart Repeater is based on the Nextivity's Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network.
Telstra Cel-Fi Go G31 Smart Repeater is a one box coverage solution for Telstra's Next G® and 4GX networks operating on 3G 850Mhz or 4G 700/1800MHz bands. It is designed to dramatically boost voice quality and increase data speeds for in vehicle applications.
Telstra Cel-Fi Go G31 Smart Repeater offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
- For cars and other vehicle applications
- Locked to Telstra's Mobile Network
- Carrier approved
- Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks - Telstra, Aldi Mobile, Boost Mobile, Woolworths Mobile and more*
*Note: Some supported networks are not fully featured.
Includes:
- Pelican Case 1400 – IP67 Watertight, crush proof, and dust proof - 33.9 x 29.5 x 15.2 cm
- Telstra Cel-Fi Go G31 Smart Repeater
- Cel-Fi Backup Battery – supplies power for 10 hours
- Internal antenna in base of case – Blackhawk 3dBi thin panel antenna
- External 11dBi LPDA Antenna with 6m LMR200 grade low loss cable
- 1.8m Extendable Tripod
- 240 Mains Power Supply & 12V Cigarette Lighter power supply
- External power and antenna ports
Installation should be carried out strictly in accordance with the Cel-Fi GO Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Use our online Contact Form for quick response.
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
 |
|
|
||||
| 2m Antenna Cable LMR195 SMA Male to SMA Female | 5m Antenna Cable LMR195 SMA Male to SMA Female | 10m Antenna Cable LMR195 SMA Male to SMA Female |
Other Details
| Mechanical Specification - Cel-Fi GO G31 Smart Repeater Module |
| Material | Powder Coated Aluminum |
| Colour | Grey |
| Nett Weight Grams | 600 |
| Connector | SMA Female/SMA Female |
| Cable | n/a |
| Mounting Method | Surface Mount/4 Self-tapping screws included |
| Dimensions mm | 28(h) x 87(w) x 255(l) |
Specifications are subject to change without notice.
