Product Description
Our Passive Repeater Solution is an economical way to increase cell tower signal on the desktop. Easy to setup and use. Basically the solutions involves mounting a Yagi antenna outside on a pole (like a TV antenna) and running a cable to the desktop where it's connected to a desktop panel. When you place your mobile phone, tablet or modem on the panel, it picks up the signal from the Yagi. The advantage over a cradle or patch lead solution is that one, two, three or more device can be boosted at the same time as long as they sit on the panel. The Yagi comes with a 10m 400 grade Super Low Loss antenna cable and pole mounting kit to suit 25-50mm diameter pole. The desktop panel comes with a short pigtail cable which mates with the 10m yagi cable. No other adapters or cabling is required. Supports GSM, 3G, 4G and 5G NR networks and covers multiple frequencies. Will work with any carrier giving 2 to 3 extra bars of signal strength in most application. For cable extensions, lightning arrestor, wall plate kit and mounting pole, see ACCESSORIES below.
Downloads | |||
BC 18dBi Yagi Antenna Data Sheet | BC Desktop Panel Antenna Data Sheet |
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
2m Antenna Cable LMR400 SMA Male to SMA Female | Lightning Arrester Kit - Inline N/M to N/F with SMA/M Pigtail | Fascia Pole 1.8m Galvanised | ||||
|
||||||