Product Description
Optus Cel-Fi Go Repeater Compact Building Kit 3G/4G Kit is suitable for building applications and includes a Pole Mount Log Periodic Directional Antenna (LPDA) with 10m cable and Coverage Panel antenna with 6m cable. For cable length options, lightning arrestor, battery backup and antenna mounting pole, see ACCESSORIES below.
| Downloads | |||
 |
Cel-Fi GO O G31 Optus Data Sheet | ||
Optus Cel-Fi Go Smart Repeater Mobile model is based on the Nextivity's Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Optus for use on the Optus Mobile Network.
Optus Cel-Fi Go Smart Repeater is a one box coverage solution for Optus 3G and 4G networks operating on 3G 900Mhz or 4G 700/1800MHz bands. It is designed to dramatically boost voice quality and increase data speeds for in vehicle applications.
Optus Cel-Fi Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
- For building and vehicle applications
- Locked to Optus Mobile Network
- Carrier approved
- Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks - Optus, Amaysim, Dodo, iiNet, plus more*
*Note: Some supported networks are not fully featured.
Includes:
- Optus Cel-Fi Go G31 Smart Repeater
- Log Period Yagi Antenna (LPDA) with 10m LMR240 grade low loss cable
- Indoor Panel Antenna with 6m LMR195 grade low loss cable
- 240V OEM Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi GO Quick Start Guide and any other information contained in the box. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Use our online Contact Form for quick response.
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
Other Details
| Mechanical Specification - Cel-Fi GO G31 Smart Repeater Module |
| Material | Powder Coated Aluminum |
| Colour | Grey |
| Nett Weight Grams | 600 |
| Connector | SMA Female/SMA Female |
| Cable | n/a |
| Mounting Method | Surface Mount/4 Self-tapping screws included |
| Dimensions mm | 28(h) x 87(w) x 255(l) |
Specifications are subject to change without notice.
