Product Description
Ex-Demo with 12 months warranty. Optus Cel-Fi Go X G32 Smart Repeater 3G/4G amplifier module only. Supports Optus and can boost two frequencies allowing simultaneous 3G and 4G operation. Requires donor and coverage antenna. For donor and coverage antenna or alternate power adapter. See ACCESSORIES below.
| Downloads | |||
 |
Cel-Fi GO X G32 Optus Data Sheet | ||
Cel-Fi Go X G32 Smart Repeater is based on the Nextivity's Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Optus for use on their networks.
Cel-Fi Go X G32 Smart Repeater will boost 3G and 4G on the Optus cellular network and is designed to dramatically boost voice quality and increase data speeds for in vehicle, 4WD and building applications.
Cel-Fi Go X G32 Smart Repeater operates on 3G 900Mhz or 4G 1800/2600MHz bands and supports two (2) bands simultaneously on the Optus network.
Cel-Fi Go X G32 Smart Repeater offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
- For building and vehicle applications
- Requires external donor and internal coverage antenna
- Locked to Optus Mobile Network
- Carrier approved
- Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks when configured for Optus - Optus, Amaysim, Dodo, iiNet, plus more*.
*Note: Some supported networks are not fully featured.
Includes:
- Cel-Fi Go X G32 Optus Smart Repeater
- 240V Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi Go Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Use our online Contact Form for quick response.
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
 |
 |
 |
||||
| Donor Antennas | Coverage Antennas | Cel-Fi Go G32 CLA 12VDC Car Lighter Adapter |
Other Details
| Mechanical Specification - Cel-Fi GO X G32 Smart Repeater Module |
| Material | Powder Coated Aluminum |
| Colour | Black |
| Nett Weight Grams | 850 |
| Connector | SMA Female/SMA Female |
| Cable | n/a |
| Mounting Method | Surface Mount/4 Self-tapping screws included |
| Dimensions mm | 43.5(h) x 96.5(w) x 272.5(l) |
Specifications are subject to change without notice.
