Product Description
Cel-Fi Go Building Repeater Basic Residential Installation by Qualified Representative. Greater Sydney area only. Note that price for this item is only valid when ordered with Cel-Fi Repeater Kit on the same order. If you wish to order stand alone installation, call us for a quotation.
Includes the following:
- Installation in a single level building.
- Supply and install 1 x roof antenna mount up to 1.8m mast height.
- Install 1 x roof antenna (OMNI or YAGI).
- Install 1 x 10m antenna cable from antenna to an internal point usually directly below the roof antenna.
- Install Cel-Fi repeater on an internal wall or other suitable location. Requires 240V Power Point (GPO).
- Install 1 x 6m internal antenna cable and internal coverage antenna in a suitable location on the wall.
- Tune and test antennas and the Cel-Fi repeater solution.
Any on-site works or supplies required beyond the scope of works defined above will incur extra chargers. These items (if any) are generally identified once installation address in known and/or upon inspection of the installation site or during the installation process. These extra items will be price quoted and the extra charge must be paid to the installer prior to the installation commencing or proceeding. As an example, extra height mounting, extra length cabling and GPO installation are typical extras that may be required.
Note that due to the nature of a mobile phone repeaters, installation location of antennas and repeater may be limited due to interference or feedback issues. Therefore antenna location on the roof and internally may need to be such that extra cabling is required in order for the repeater to function correctly and be Telstra approved.
Items not included in the installation are as follows:
- Extra roof mounting hardware to gain extra height.
- Extra equipment required for roof work where roof is not accessible by ladder.
- Longer antenna cables or higher grade antenna cables for longer cable runs. Typically any run longer than 10m.
- GPO.
- Wall plate outlet.
- Extra travel beyond Sydney Metro area (where available).
- Any other item or labour required to achieve a working and approved installation.
Specifications are subject to change without notice. Picture may not be exact model as described.
